What if the bathroom breaks down and the gas showe

2022-07-22
  • Detail

The weather is cold, and the water heater is used more and more frequently in our daily life, but the gas shower often encounters the problem of ignition failure in our use, so what do you do if you know it? Today, I'm here to introduce to you what to do if it doesn't catch fire. I hope it can be helpful to you

the weather is cold, and the water heater is used more and more frequently in our daily life, but the gas shower often encounters the problem of ignition failure in our use. So what do you do if you know it? Today, I'm here to introduce to you what to do if it doesn't catch fire. I hope it can be helpful to you

what is the reason why the gas shower can't start? The gas water heater can be divided into no ignition and no ignition with ignition sound

1. Battery problem: if you use a battery, you should first check whether the battery is too old. If the voltage is not enough, the gas water heater will not catch fire. Before confirming the quality of the solenoid valve, confirm whether the control circuit of the igniter is normal. If there is a fault, the solenoid valve cannot be controlled to pull in

2. Igniter failure: either the pulse igniter or the controller has a failure, and the gas water heater cannot ignite normally

3. Water pressure problem: a. the gas water heater cannot be started normally when the water pressure is low, and it cannot start; b. The filter screen at the water inlet is blocked, so the water cannot flow normally. Just clean it up

4. Water gas linkage device failure: a. the tympanic membrane in the water gas linkage valve is aging or damaged and cannot push the microswitch; b. The microswitch is broken

5. If the air source switch is not turned on or the air inlet filter screen is blocked, turn on the air source correctly and clean the air inlet filter screen

6. Inconsistent gas types: for example, connect the liquefied gas water heater to natural gas

7. The valve seal rises after being corroded by gas. Replace parts

8. The smoke pipe cannot exhaust normally. a. If the smoke pipe is blocked, remove the blockage of the smoke pipe; b. The smoke pipe is too long and not installed correctly

I believe that after reading the above content, you should understand that the gas shower can't start. I hope it can be helpful to you

郑州腺肌症医院

长沙骨科医院

上海眼科医院

Copyright © 2011 JIN SHI